Time series data are data points collected over a period of time as a sequence of time gap. Time series data analysis means analyzing the available data to find out the pattern or trend in the data to predict some future values which will, in turn, help more effective and optimize business decisions.

Methods for time series analysis

Moreover, time series analysis can be classified as:

Techniques used for time series analysis:

ARIMA modeling

ARIMA is the abbreviation for AutoRegressive Integrated Moving Average. Auto Regressive (AR) terms refer to the lags of the differenced series, Moving Average (MA) terms refer to the lags of errors and I is the number of difference used to make the time series stationary.

Assumptions of ARIMA model

Steps to be followed for ARIMA modeling:

The first step in time series data modeling using R is to convert the available data into time series data format. To do so we need to run the following command in R:

tsData = ts(RawData, start = c(2011,1), frequency = 12)

where RawData is the univariate data which we are converting to time series. start gives the starting time of the data, in this case, its Jan 2011. As it is a monthly data so ‘frequency=12’.

This is how the actual dataset looks like:

We can infer from the graph itself that the data points follows an overall upward trend with some outliers in terms of sudden lower values. Now we need to do some analysis to find out the exact non-stationary and seasonality in the data.

Exploratory analysis

Before performing any EDA on the data, we need to understand the three components of a time series data:

We can use the following R code to find out the components of this time series:

components.ts = decompose(tsData)
plot(components.ts)

The output will look like this:

Here we get 4 components:

Observing these 4 graphs closely, we can find out if the data satisfies all the assumptions of ARIMA modeling, mainly, stationarity and seasonality.

Next, we need to remove non-stationary part for ARIMA. For the sake of discussion here, we will remove the seasonal part of the data as well. The seasonal part can be removed from the analysis and added later, or it can be taken care of in the ARIMA model itself.

To achieve stationarity:

The R code for unit root test:

library("fUnitRoots")
urkpssTest(tsData, type = c("tau"), lags = c("short"),use.lag = NULL, doplot = TRUE)
tsstationary = diff(tsData, differences=1)
plot(tsstationary)

The output will look like this:

After removing non-stationarity:

Various plots and functions that help in detecting seasonality:

R codes to calculate autocorrelation:

acf(tsData,lag.max=34)

The autocorrelation function (acf()) gives the autocorrelation at all possible lags. The autocorrelation at lag 0 is included by default which always takes the value 1 as it represents the correlation between the data and themselves. As we can infer from the graph above, the autocorrelation continues to decrease as the lag increases, confirming that there is no linear association between observations separated by larger lags.

timeseriesseasonallyadjusted <- tsData- timeseriescomponents$seasonal
tsstationary <- diff(timeseriesseasonallyadjusted, differences=1)

To remove seasonality from the data, we subtract the seasonal component from the original series and then difference it to make it stationary.

After removing seasonality and making the data stationary, it will look like:

Smoothing is usually done to help us better see patterns, trends in time series. Generally it smooths out the irregular roughness to see a clearer signal. For seasonal data, we might smooth out the seasonality so that we can identify the trend. Smoothing doesn’t provide us with a model, but it can be a good first step in describing various components of the series.

To smooth time series:

Fit the model

Once the data is ready and satisfies all the assumptions of modeling, to determine the order of the model to be fitted to the data, we need three variables: p, d, and q which are non-negative integers that refer to the order of the autoregressive, integrated, and moving average parts of the model respectively.

To examine which p and q values will be appropriate we need to run acf() and pacf() function.

pacf() at lag k is autocorrelation function which describes the correlation between all data points that are exactly k steps apart- after accounting for their correlation with the data between those k steps. It helps to identify the number of autoregression (AR) coefficients(p-value) in an ARIMA model.

The R code to run the acf() and pacf() commands.

acf(tsstationary, lag.max=34)
pacf(tsstationary, lag.max=34)

The plots will look like:

Shape of acf() to define values of p and q:
Looking at the graphs and going through the table we can determine which type of the model to select and what will be the values of p, d and q.

fitARIMA <- arima(tsData, order=c(1,1,1),seasonal = list(order = c(1,0,0), period = 12),method="ML")
library(lmtest)
coeftest(fitARIMA)

order specifies the non-seasonal part of the ARIMA model: (p, d, q) refers to the AR order, the degree of difference, and the MA order.

seasonal specifies the seasonal part of the ARIMA model, plus the period (which defaults to frequency(x) i.e 12 in this case). This function requires a list with components order and period, but given a numeric vector of length 3, it turns them into a suitable list with the specification as the ‘order’.

method refers to the fitting method, which can be ‘maximum likelihood(ML)’ or ‘minimize conditional sum-of-squares(CSS)’. The default is conditional-sum-of-squares.

This is a recursive process and we need to run this arima() function with different (p,d,q) values to find out the most optimized and efficient model.

The output from fitarima() includes the fitted coefficients and the standard error (s.e.) for each coefficient. Observing the coefficients we can exclude the insignificant ones. We can use a function confint() for this purpose.
We can use a function confint() for this purpose. 

confint(fitARIMA)

Choosing the best model

R uses maximum likelihood estimation (MLE) to estimate the ARIMA model. It tries to maximize the log-likelihood for given values of p, d, and q when finding parameter estimates so as to maximize the probability of obtaining the data that we have observed.

Find out Akaike’s Information Criterion (AIC) for a set of models and investigate the models with lowest AIC values. Try Schwarz Bayesian Information Criterion (BIC) and investigate the models with lowest BIC values. When estimating model parameters using maximum likelihood estimation, it is possible to increase the likelihood by adding additional parameters, which may result in over fitting. The BIC resolves this problem by introducing a penalty term for the number of parameters in the model. Along with AIC and BIC, we also need to closely watch those coefficient values and we should decide whether to include that component or not according to their significance level.

Diagnostic measures

Try to find out the pattern in the residuals of the chosen model by plotting the ACF of the residuals, and doing a portmanteau test. We need to try modified models if the plot doesn’t look like white noise.

Once the residuals look like white noise, calculate forecasts.

Box-Ljung test

It is a test of independence at all lags up to the one specified. Instead of testing randomness at each distinct lag, it tests the "overall" randomness based on a number of lags, and is therefore a portmanteau test. It is applied to the residuals of a fitted ARIMA model, not the original series, and in such applications the hypothesis actually being tested is that the residuals from the ARIMA model have no autocorrelation.

R code to obtain the box test results:

acf(fitARIMA$residuals)
library(FitAR)
boxresult-LjungBoxTest (fitARIMA$residuals,k=2,StartLag=1)
plot(boxresult[,3],main= "Ljung-Box Q Test", ylab= "P-values", xlab= "Lag")
qqnorm(fitARIMA$residuals)
qqline(fitARIMA$residuals)

Output:

The ACF of the residuals shows no significant autocorrelations.

The p-values for the Ljung-Box Q test all are well above 0.05, indicating “non-significance.”

The values are normal as they rest on a line and aren’t all over the place.

As all the graphs are in support of the assumption that there is no pattern in the residuals, we can go ahead and calculate the forecast.

Work flow diagram

auto.arima() function:
The forecast package provides two functions: ets() and auto.arima() for the automatic selection of exponential and ARIMA models.

The auto.arima() function in R uses a combination of unit root tests, minimization of the AIC and MLE to obtain an ARIMA model.

KPSS test is used to determine the number of differences (d) In Hyndman-Khandakar algorithm for automatic ARIMA modeling.

The p,d, and q are then chosen by minimizing the AICc. The algorithm uses a stepwise search to traverse the model space to select the best model with smallest AICc.

If d=0 then the constant c is included; if d≥1 then the constant c is set to zero. Variations on the current model are considered by varying p and/or q from the current model by ±1 and including/excluding c from the current model.

The best model considered so far (either the current model, or one of these variations) becomes the new current model.

Now, this process is repeated until no lower AIC can be found.

auto.arima(tsData, trace=TRUE)

Forecasting using an ARIMA model

The parameters of that ARIMA model can be used as a predictive model for making forecasts for future values of the time series once the best-suited model is selected for time series data.

The d-value effects the prediction intervals —the prediction intervals increases in size with higher values of ‘d’. The prediction intervals will all be essentially the same when d=0 because the long-term forecast standard deviation will go to the standard deviation of the historical data.

There is a function called predict() which is used for predictions from the results of various model fitting functions. It takes an argument n.ahead() specifying how many time steps ahead to predict.

predict(fitARIMA,n.ahead = 5)

forecast.Arima() function in the forecast R package can also be used to forecast for future values of the time series. Here we can also specify the confidence level for prediction intervals by using the level argument.

futurVal <- forecast.Arima(fitARIMA,h=10, level=c(99.5))
plot.forecast(futurVal)

We need to make sure that the forecast errors are not correlated, normally distributed with mean zero and constant variance. We can use the diagnostic measure to find out the appropriate model with best possible forecast values.

The forecasts are shown as a blue line, with the 80% prediction intervals as a dark shaded area, and the 95% prediction intervals as a light shaded area.

This is the overall process by which we can analyze time series data and forecast values from existing series using ARIMA.

Click here to get the entire code.

References

ARIMATime Series